2019 Caterpillar Compact Track and Multi Terrain Loaders 249D

Selling Price -

$52,350.00

Caterpillar 249D Compact Track Loader with only 137 Hours for sale at Big Gus Tractor and Equipment in Mary Esther Florida. This 249D skid steer is a 1 owner trade in, only has 137 hours and was just serviced in our shop. Features a heated and air conditioned cab, hydraulic quick attach, rear back up camera, gross power of 67.1 hp, an operating weight of 7,685 lbs, a tipping load of 4,600 lbs, and a rated operating capacity of 2,300 lbs at 50% tipping load. Operating Weight: 7,685 lb. Well maintained! Financing available up to 84 months for qualified buyers with $0 down!

Information

Used 2019 Caterpillar Compact Track and Multi Terrain Loaders 249D Track Loader For Sale In Mary Esther, FL


This Pre-Owned 2019 Caterpillar Compact Track and Multi Terrain Loaders 249D Track Loader is for sale at Big Gus Tractor & Equipment located in Mary Esther, Florida. Reach out to Big Gus Tractor & Equipment today, CONTACT US. If this isn't the exact Caterpillar Track Loader you're looking for don't hesitate to go back and REVISE YOUR SEARCH. We're sure to have the perfect Track Loader for you in our showroom near Fort Walton Beach, FL. Visit Big Gus Tractor & Equipment, the premier Caterpillar dealership of Florida.

Big Gus Tractor & Equipment

Address: 1490 US-98, Mary Esther, FL 32569

Phone: (850) 937-7009

2019 Caterpillar Compact Track and Multi Terrain Loaders 249D


The Caterpillar 249D Compact Track Loader has a gross power of 67.1 hp, an operating weight of 7,685 lbs, a tipping load of 4,600 lbs, and a rated operating capacity of 2,300 lbs at 50% tipping load.
Key Specifications:

Engine:
Model: Cat C2.2 CRDI

Gross Power (SAE J1995): 67.1 hp (50.1 kW)
Net Power (ISO 9249): 66.5 hp (49.6 kW)
Displacement: 134.3 cu in (2.2 L)
Bore: 3.3 in (84 mm)
Stroke: 3.9 in (100 mm)

Operating Specifications:

Rated Operating Capacity (50% Tipping Load): 2,300 lb (1044 kg)

Rated Operating Capacity (35% Tipping Load): 1,610 lb (790 kg)
Tipping Load: 4,600 lb (2260 kg)
Breakout Force (Tilt Cylinder): 3,963 lb
Ground Pressure: 5.6 psi (with 320 mm/12.6 in track)

Weights:

Operating Weight: 7,685 lb (3486 kg)

Dimensions:

Length of Track on Ground: 54.5 in (1384 mm)

Overall Length with Track: 71.2 in (1808 mm)
Length without Bucket: 99.3 in (2523 mm)
Length with Bucket on Ground: 127.3 in (3233 mm)
Maximum Overall Height: 150.8 in (3831 mm)
Turning Radius from Center - Bucket: 81.1 in
Bucket Pin Height - Maximum Lift: 118.2 in (3002 mm)
Bucket Pin Height - Carry Position: 8.6 in (219 mm)
Reach at Maximum Lift and Dump: 28.6 in (727 mm)
Clearance at Maximum Lift and Dump: 88.7 in (2253 mm)
Ground Clearance: 7.6 in (194 mm)
Departure Angle: 34.5°

Hydraulic System:

Hydraulic Flow - Standard - Loader Hydraulic Pressure: 3336 psi (23000 kPa)

Hydraulic Flow - High Flow - Loader Hydraulic Flow: 26 gal/min (99 l/min)

Power Train:

Travel Speed - Forward or Reverse - One Speed: 5 mph (8.1 km/h)

Travel Speed - Forward or Reverse - Two Speed: 7.6 mph (12.2 km/h)

Service Refill Capacities:

Engine Crankcase: 2.6 gal (US) (10 l)

Fuel Tank: 15.1 gal (US) (57 l)

Photos

Highlights

  • $54,999.00
  • $52,350.00
  • Mary Esther, Florida
  • Pre-Owned
  • Cat 249D Skid Steer
  • 2019
  • Caterpillar
  • Compact Track and Multi Terrain Loaders 249D
  • Yellow
  • CAT diesel
  • 67
  • 137
  • Diesel
  • Available
  • Vehicle (320 mm/12.6 in tracks): 66.0 in | Vehicle (400 mm/15.7 in tracks): 69.1 in
  • Top of Cab: 80.3 in | Bucket Pin - Carry Position: 8.6 in | Bucket Pin - Maximum Lift: 118.2 in | Rack Back Angle - Maximum: 87.5°

Specifications

  • 2019
  • Caterpillar
  • Compact Track and Multi Terrain Loaders
  • 249D
  • General
  • Model: Cat C2.2 CRDI
  • Net: 65.8 HP | Gross Power - SAE J1995: 67.1 HP | Net Power - SAE 1349: 65.8 HP | Net Power - ISO 9249: 66.5 HP
  • 134.3 in³
  • 3.3 in
  • 3.9 in
  • Peak - 1,500 rpm - SAE J1995: 153.0 ft·lbf
  • High Flow - Hydraulic Power (Calculated): 50.9 HP | High Flow - Loader Hydraulic Flow: 26.0 gal/min | High Flow - Loader Hydraulic Pressure: 3336.0 psi | Standard - Loader: 18.0 gal/min | Hydraulic Power (Calculated): 35.5 HP | Standard - Loader Hydraulic Pressure: 3336.0 psi
  • With 320 mm/12.6 in Track: 5.6 psi | With 400 mm/15.7 in Track: 4.6 psi
  • Rated Operating Capacities - 50% Tipping Load: 2300.0 lb | Tipping Load: 4600.0 lb | Breakout Force - Tilt Cylinder: 3963.0 lb | Rated Operating Capacity with Optional Counterweight: 2500.0 lb | Ground Contact Area - With 320 mm/12.6 in Track: 1373.0 in² | Ground Contact Area - With 400 mm/15.7 in Track: 1716.0 in² | Rated Operating Capacities - 35% Tipping Load: 1610.0 lb
  • Inside Cab: 83.0 dB(A) | Outside Cab: 103.0 dB(A)
  • Departure Angle: 34.5° | Maximum Dump Angle: 48° | Clearance at Maximum Lift and Dump: 88.7 in | Maximum Reach - With Arms Parallel to Ground: 51.8 in | Reach - Maximum Lift/Dump: 28.6 in | Turning Radius from Center - Bucket: 81.1 in | Turning Radius from Center - Coupler: 45.7 in | Turning Radius from Center - Machine Rear: 57.4 in
  • Track on Ground: 54.5 in | With Bucket on Ground: 127.3 in | Without Bucket: 99.3 in
  • Top of Cab: 80.3 in | Bucket Pin - Carry Position: 8.6 in | Bucket Pin - Maximum Lift: 118.2 in | Rack Back Angle - Maximum: 87.5°
  • Vehicle (320 mm/12.6 in tracks): 66.0 in | Vehicle (400 mm/15.7 in tracks): 69.1 in
  • Track: 71.2 in
  • Maximum Overall: 150.8 in
  • 7.6 in
  • System: 3.2 gal (US)
  • Engine Crankcase: 2.6 gal (US)
  • Tank: 15.1 gal (US)
  • System: 11.9 gal (US) | Tank: 9.0 gal (US)
  • 7685.0 lb